How to connect EdgeMarc SBC/Gateway to the LAN and access it for the first time?
The LAN interface ports are pre-configured with the IP address 192.168.1.1.
1. Connect a computer to the LAN interface port (LAN Port 1) using an Ethernet cable or connect to an Ethernet switch (using the IP address 192.168.1.2 and subnet mask 255.255.255.0).
2. Launch a web browser on your computer and enter the following URL: http://192.168.1.1.
3. Press Return. The EdgeMarc login screen is displayed.
Figure 5-1 EdgeMarc login screen
4. Enter your initial username in the field provided: root
5. Enter your initial password in the field provided:default
6. Click OK.
7. After you have logged in to the system for the first time with the default credentials, you are directed to the Change Password page.
8. Enter your Current and New Passwords in the Change Password Page according to the new password instructions given in the page and then click Change Password. The Password Change Confirmation Page will be displayed
9. Select Click here to log on with your new password from the Password Change Confirmation Page (Figure 5-3).
10. You will be navigated again to the EdgeMarc login screen. Log in to the EdgeMarc Admin landing page with your User Name and New Password from the EdgeMarc login screen.